60W Dual output switching power supply(Output 5V,1

60W dual output switch power supplyCompetitivedprice and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelD-60A D-60BCH1CH2CH1CH2DC output voltage5V12V5V24VOutput voltage range(Note:2)±2%±6%±2%±5%Rated output current4A3A3A1.8AOutput current range0.3-6A0.2-4A0.3-6A0.2-2.2AWave and noise(Note:3)60mVp-p120mVp-p60mVp-p150mVp-pInlet stability(Note:4)±0.5%±1%±0.5%±1%Load stability(Note:5)±0.5%±5%±0.5%±6%DC output power56W58WEfficiency73%76%Adjustable range for DC voltageCH1; +10, -5%CH1; +10, -5%AC input voltage range88 132VAC/170 264VAC selected by switch 47 63Hz;120 370VDCInput current2.5A/115V 1.25A/230VAC inrush currentCold-start current 30A/115V/60A/230VLeakage current<1mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryOver-voltage protectionCH1: 5.75 6.75VTemperature coefficient±0.03%/°c(0 50°c)ON+5VSetup, rise , hold up time800ms,50ms, 10ms/115VAC 300ms, 50ms, 80ms/230VACVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHStore temperature and humidity-20 +85%, 10% 95&RHOverall dimension159×97×38mmWeight0.55KgsSafety standardsUL 1012, TUV EN60590(IEC950, UL 1950) ApporvedEMC standardsCISPR22(EN55022)class B, IEC801-2,3,4 IEC555-2 VerificationNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%.