5mW DPSS 532nm Green Laser Module, F1 Series

GL532F1-005Optical ParameterOutput Wavelength532±1nmOutput Power5mWSpatial ModeTEM00Mode Quality (M2)<1.2Operating ModeCWBeam Divergence, Full Angle1.5 ± 0.2mrad[1]Beam Diameter (1/e2) @ Exit1.0 ± 0.2mmPower Stability5% (rms, over 2 hours, T= 25°C)10% (rms, over operating temperature)Amplitude Noise (20Hz to 20MHz) 30% rmsResidual IR<0.1%Electrical ParameterPower SupplyDDR-0605DDR-15055VDC PCB5VDC PCBLD operating current50 600mA50 1500mAInput Voltage5VDC5VDCModulation10KHz TTL modulation [2]Mechanical ParameterDimensions of Laser HeadΦ20 × 60mmWeight of Laser Head0.1KgDimensions of Power Supply58×35 × 20mm87×50 × 32mmWeight of Power Supply0.05Kg0.1KgReliabilityWarm Up Time<5 minutesCoolingForced-air cooled [3]Operating Temperature, Case10°C 30°CStorage Temperature-20°C 60°CExpected Operation Lifetime10000 hoursWarranty12 months [4]Note[1]0.1mrad 1.0mrad beam divergence is avaiable upon request. [2]30KHz TTL modulation (0=laser off, 1=laser on) or 2KHz Analog modulation (0 5VDC) is avaiable upon request. [3] The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. [4] 2-Year Warranty is avaiable upon request.