450 IN 1 toy

DOS-B(2008) 450 IN 1 Brief Introduction Functional Description PC board, several hundred games included, performance stable and reliable. JAMMA standard interface equipped supports multiple plays. Coins pay by menu available, no coins swallowed and leaked. Multiple control modes supported, press startup key for 5 seconds and back to menu. Game is an unmanned,after 3 minutes it will return to the menu. Items Included .Host Computer 1set .AC power supply cable 1pcs .Users Manual 1pcs .Games List 1sheet .Label tape 1pcsNotes 1. Prior to switch on, power voltage shall be checked in line with requirements. 2. Host computer set flatly in console, no turn-over permitted; 3. Enough space around host computer must be left to facilitate heat emission, never cover cooling fan of host computer.Operation Instruction Start-up While switch on, asynchronous stripes or snowflakes will display on screen, and will synchronize and the games selection menu indicated after 20-30 seconds.Games Selection Never insert coins before games selection menu appears. In selection menu, only after coins inserted can rocker be moved toward games to be selected (move rocker up or down to select games, and move left or right to rapid turn over games sheet). After coins inserted, press 1P key startup and begin access to game selected.Game Exit (back to menu) Mode 1Press 1P (START key) for 5 seconds.see Start & back to menu on Page 6 Mode 2Press key MENU (see also JAMMA interfaces definition on Page 2) Close-up Prior to game exit, back to menu and switch off.Safety Warning To extend its life span and to minimize accidents, Its suggested to observe instructions as follows:1.Be careful to handle and use the machine in which such precision parts as hard disk are equipped, it must be prohibited to beat, tremble and shake it.2.To keep heat emission and prevent cooling fan covered. While the cooling fan at abnormal condition, please stop using the machine and send it to service station for maintenance.3.Plugging in/out live cables and sockets is prohibited.4.Prior to switch on the machine, please make sure that local power supply voltage is coincided with its running voltage. 5.There is no any parts repairable for users,please do not dismantle any parts. If necessary, please contact the authorized department for maintenance.