35A S-P AC Contactor

1. Scope of applicationS-P Series AC contactor is mainly used for the exchange of 50Hz and 60Hz, rated voltage to 660V, rated current to the 160A Connected to the power system and breaking the circuit, and may with the TH series thermal overload relay or electronic motor protection devices combined into a starter in order to protect the operation of the equipment that may have been set.2. Normal working conditions and installation conditions1) The surrounding air temperature as follows:? -5 °C + 40 °C Within 24 hours on average does not exceed +35 °C. 2) Altitude: not exceed 2000m. 3) Atmospheric conditions: the maximum temperature of +40 °C, air relative humidity of not more than 50%; at a lower temperature allows a higher relative humidity, for example, at 20 °C up to 90%. Right as the condensing temperature to produce the occasional special measures to be taken. 4) Pollution Level: 3. 5) Installation Type:3 class. 6 ) Installation conditions: installation of surface and vertical tilt is not greater than ± 5 °. 7) Shock and vibration: Product should be installed and applied in the absence of a significant shake, shock and vibration areas. 8) In the absence of explosive medium, and medium, non-corrosive metal and undermine the sufficient insulating gas and conductive dust areas. 9) In the absence of rain and snow hit areas.S-P35 specification:Motor rated volumeCNS C4048 AC3(rated power) 3 phase 200-220V380-440V500-550VKW91515HP12.52020A352722