300W modified sine wave DC to AC Power Inverter

Features: 1)Input protections: Polarity reverse / Over and under voltage / Low battery Alarm and shut down 2)Output protections: Short circuit / Overload / Over temperature 3)With power ON/OFF switch and LED indicator 4)Input and output fully isolation 5)Low power consumption(standby) 6)LVD meet EN60950 and E8 mark 7)EMC meet EN61000-6-1-3,EN55022 Specifications :1) Max. continuous output power: 300W2) Max. continuous output power 2H.: 340W3) Surge capability peak output power: 600W4) DC input static current (no load): ≤0.4AMP5) AC output wave form: Modified Sine wave6) Normal input voltage range: 11-15V / 21 30V7) High voltage cut off level: >15V / 30V8) Low voltage alarm: 10.6V±0.3V(DC12V) / 20.5V±0.5V(DC24V)9) Low voltage cut off level: 9.5V±0.5V(DC12V) / 19.5V±0.5V(DC24V)10) Output AC voltage : AC 115V±5% RMS / AC 230V±5% RMS11) Output frequency level: 60HZ±1Hz / 50HZ12) Overload power range: 300W, 5-30%13) Hi-pot test: PRI/sec, 1500V/AC 5mA/60s14) Temperature protection: <65°C15) Full load max. optimum efficiency: ≥90%16) AC output short circuit protection: system shut down (no damage)17) Fan run: Working with load18) Fault warning: alarm beep19) LED indicator:a) Normal: greenb) Fault: red green20) Fuse (spade type): 40Ax 1pcs21) Dimensions (L x W x H): 155x104 x 55mm22) Environmental condition:a) Operating temperature: -5 45°Cb) Operating relative humidity: 10-90% RHc) Storage temperature: -10-50°Cd) Storage relative humidity: 10-95% RH