2PCS/Pair Quality 200M Powerline Network Adapter

2PCS/PairQuality Powerline Network Adapter HomePlug AV 200M Ethernet Adapter. Introduction: HomePlug AV 200M is a networking device that utilizes the existing wiring system as a path to transmit data signal through the inter-conversion between digital and analog signal. With this functionality, HomePlug AV devices can be plugged into an AC outlet to draw power and at the same time establishing a network connection between two or more Ethernet devices. HomePlug AV 200M can be used to bridge any Ethernet device to your Powerline network in your home or office. With this technology, Ethernet devices in your home or office can equally share high speed data transmission rate without the need to spend excessive time and money installing expensive Ethernet cable. It can be plugged into an Ethernet port on a router to equip a network with Powerline capabilities and take advantage of the router features. HomePlug AV device can also be plugged directly into a cable or DSL modem that allows instant internet access over home Powerlines to each computer equipped with a HomePlug AV certified Powerline network adapter. HomePlug AV 200M makes high-speed modem sharing as fast and simple as plugging the devices in the wall. The PL201 & PL204are bothsimple and elegant, small& thin, apperarance is shining & beautiful!Not likeother OEM powerlineadapters fat and urgly. Features: 1. Physical layer data rate up to 200Mbps over existing Powerline. 2. Uses Powerline technology that takes advantage of the unused bandwidth of the electrical wiring in the home. 3. Ideal for Triple Play applications such as IPTV, VoIP telephony and high-speed Internet access. 4. Support 10/100 (MDI/MDIX) Ethernet switching. 5. Compliant with the HomePlug Powerline Alliance Industry specification HomePlug AV. 6. Power supplier design inside. 7. Ideal for Residential Users Specifications: Protocol: TDMA, CSMA/CA Transmission Speed: 200Mbps Optimal Coverage Range: 300M Modulation: Supports OFDM - 1155 carriers,1024 / 256 / 64QAM, QPSK, BPSK and ROBO Frequency Band: 2MHz 30MHz Security: 128-bit AES encryption over household power supplier grid Device Port: Ethernet RJ-45 Power Supplier Input: 100 240V AC, 50 60Hz Physical Interface: Ethernet 10/100M (MDI/MDIX) switch Sync button, Reset button Quick Start (Setup Powerline Network): Push Button usage Sync Button is used to add a HomePlug device to a Powerline network or enable it to join a network, Threetypes of Sync Button trigger states: 1. Broadcast State: Enable HomePlug AV device to provide information for another HomePlug AV device to join its Powerline network group (works even if it is the only device existing within the network group). 2. Join State: This allows an ungrouped HomePlug AV device to join an existing powerline network group. 3. Ungroup State: Press the Sync Button for more than 10 seconds to detach the device from its network group. Application Scenarios Management Software- PPU: The CD comes with the product contains a PowerLine Network devices Management Software -PPU The Power Packet Utility(PPU)is an End User Configuration Management Software tool that can be on Atheros HomePlugAV devices or HomePlug1.0 devices . The Utility tracks and scans the AVLN and displays the list of Atheros HomePlugAV devices or HomePlug1.0 devices available in the network. The utility is fully customizable to fit your companies’ look and feel. For more application, please refer product manual.