2010 new Facial Steamer Beauty equipment

Facial steamer The facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (like blackheads, whiteheads, make up, etc.) and generally revitalize the skin. Operations: 1.Fill the glass jar with distill water only through water funnel , do not exceed the red warning line. Make sure the jar is attached firmly and perfectly to the steamer. 2.Connect power plug. Turn power on , power indicator should light up. Steam will come out in around 10-15 minutes after the power is switched on. 3.Position steam jet to aim at clients chin and steam should travel over his/her entire face. 4.After finishing, Turn off the power.Unplug power socket and wait till the glass is cool before removing it from the machine. 5.For safety purpose, the machine will automatically shut off when water level is below the heating element. Cleaning instructions: 1.Glass jar and heat element should be cleaned at least once a week with distill water. 2.Do not lose the rubber band on top of the glass jar. It is used to prevent water spilling out. Cautions: 1.If steam too long, skin may become dry. If steam too close, skin may feel too hot. 2.The water filled in the glass jar must be distill water only. 3.Do not touch or remove the glass jar when machine is in use.