blow dryer Model:Hb1003 Specification: 1.Voltage:110-220V 50hZ 2.Power:2800W 3.7HP 3.Current:12A 4.Wind speed:50m/s 5.Air speed:27000fpm-36000f 6.Nois:60DB 7.Heat:43°C-60°C 8.size:160*380mm 9.weight:4.8KG Instruction: 1.The security of operation place a.Keep the operation place and bright,mess and dark cause accidens. b.Keep the workplace away from explosive,such as flammable liquid,flammable gas,anddust,whichcan prent eyes and skin from being hurted while operation. c.The dryer mustn't be used in bathroom and ubder the water tap,or you will be shocked by electric. d.Keep the kids away from the operation place to avoid accidents happening. 2.The aecurity of machine a.Plug must matches socket,can't modifyplugin any ways.Plug has not been modified and matched socket can reduce the danger to be shocked by electric. b.Avoid the body contacting the ground,such as pipe,heat sink and refrigerators,contacting the ground will increase the risk to be shocked by electric. c.Avoid touching the ground to reduce the danger to be shock by electric. d.To prolong the machine's lifetime,you'd better make the wind speed slowest and stop heating before turn on or turn off themachine. e.In order not to be shocked by electric and cause short circuit,don't put sharp things into the machine. f.Danaged wrie should be sent to maintenance department or profressingals to replace. g.In order to damage machine,please don't hit machine or make it fall off anythings. 3.The security of people a.If there is something wroung with machine after using for some time,please contact with profressionals. b.Don't put hands into wind inlet and wind outlet. c.Don't put sharp things into machine,or it may cause electric-shock and short circuit. 4.Instruction and notes a.The dryer is very dangerous that can't be controted by switch and must repair ai the moment. b.Before you regulate dryer,store dryer,or replace some accessories,you must pull out plug to avold machine being turned on by accident. c.Keep the idle dryer away from children's reach. d.To prolong machine's lifetime,you should clean the fur in wind inlet and outlet,sweep machine's appearance with nautral cleaner mixed with water.