Z-连接线插座

Our slogan is: "Just adjust and tighten, and you are THROUGH"! Only if life is this easy...After years of Research and Development, we have came up with our very own Patented "Z Wire Linksseries, to include:- Z-Connector- Wire Vises / Joiners- Wire Vises with Loops- Wire LinksZ WireLinkis a connector, splice, and tensioners for use on all types of wire / cable:- eliminates the need for stretchers, ratchets, crimps, crimping tools, wire splices, and tying wire by hand.- operates like a Chinese finger trap with one-way locking channels- the wire passes through theitem in one direction, then ceramic rollers and steel springs lock the wire and prevent it from going back the other way.Z Wire Links are perfect for- barbed wire, hi-tensile wire / cables, and plain wire / cables- stock netting- repairing damaged or old wire without causing additional damage bracing fence posts, etcWe offer4 standardsizes of Wirelinks.However our own R&D and Mould departments regularly make adjustments on wire links based on customers' wire / cable samples.We offer4 standardsizes of Wire links.However our own R&D and Mould departments regularly make adjustments on wire links based on customers' wire / cable samples.Item no.Suitable for wires/cables: mmInch: ''5057V 1.6 - 2.60.06 - 0.1025059V 2.6 - 3.00.103-0.1195063V 3.0 - 3.50.120-0.1385065V 3.5 – 4.00.139-0.158We recently have just adjusted the5062V series based on 1/8 inch CABLES from a large US customer.The initial trial by the customer proved that new 5062V Z-Connectors were able to hold the cable without slipping for weights up to 1700 lbs. The cable broke before it slipped for all tests (see photo).The entire Z-Connector series have also been certified by SGS to be able to hold wires / cables without having it slipped for weights up to 1300 lbs - 1700 lbs depending on the sizes.Please contact Grace to find out if Z-Connector series is your next alternative.