Unidirectional Fabric(0Degree)

Warp unidirectional Fabric(0Degree); Warp unidirectional Fabric(0Degree) is a kind of fabric that only using 0 degree directional strength,which is called as knitted warp unidirectional fabric(0Deg.).Warp fiber:Weft fiber is normally over 4:1 or utilize 40-50g/m2 polymer mat. PRODUCT PROPERTIES: 1. Ease of handling and cutting 2. High intensity and Quick Wet out 3. Stability 4.Stiffness APPLICATION: Used in length direction reiforcement or ring turns reiforcement.e.g. vane of the wind power, bridge,pier,pillar`s reinforcement and so on. SPECIFICATION: STYLEMASS g/m² MASS (oz/yd²)ROLL LENGTH (m)ROLL WEIGHT (kg)RESIN COMPATIBILITYEDJ45045013.311150UP or Epoxy resinEDJ55055016.29150UP or Epoxy resinEDJ60060017.78450UP or Epoxy resinEDJ70070020.67250UP or Epoxy resinEDJ90090026.55650UP or Epoxy resinNOTE Normally the width is 100cm,it can be cut to any width according to the customers requirements. We can also combine the chopped strand mat. PACKING: Each roll is covered by polyethylene plastic bag,then placed into cardboard box .Normally,the roll weight is 50Kg.Cardboard box size: L×B×H=1050mm×260mm×260mm.Also the Cardboard box can be put on the pallet, each pallet stacks 16 cardboard boxes, which size is: L×B×H=1120mm×1120mm×1150mm. STORAGE: Product shall be placed under dryness condition and shall not be opened the covering membrane until applying.