Tri-vision on Unipole

Tri-vision on Unipole Main technical parameters: 1. Main material: special aluminum alloy, environmental protection type with advantages of firm, not easy to cause deformation, durable and not easy to cause oxidation. 2. Outer frame specification: 145mm (width)*160mm(thickness) 3. Width of triangular prism: 131mm, thickness 1.35mm2.0mm 4. Weight : about 20kg per square meter 5. Drive: cam propulsion system/ Double-gear stepping wheel drive system. The drive is steadies more compactness without deviation; 6. Drive shaft: solid-core aluminum shaft with diameter of 2cm, the twisting force is strong and the drive is smooth; 7. Picture composition: 7.0 m triangular prism without connection; the length is not limited. 8. Picture gap: confirm according to the height of tri-vision billboard. 9. Picture turning time: 6-15 seconds per picture (preset at factory). 10. Picture displaying time: set freely between 0 second to 900 seconds. 11. Tri-vision power supply: voltage: 220V; current: 0.54A, frequency: 50HZ and power: 90W. 12. Wind resistance capability: within Scale 10. 13. Running life: Qualified installation will ensure normal service life up to 15 years based on 16 hours each day. Production configuration: 1. Motor: Original Japanese Panasonic 90W stepping motor with good heat emission, low vibration, high performance and long service life. 2. Control system: French Schneider with such functions as active protection automatic reset and intelligent control picture displaying time, etc.