pressure gauge manometer ConST211

Thepressure gauge manometer ConST211 is a high-accuracy, high-resolution digital pressure gauge. Because of their robust design, these gauges meet stringent demands and can be used in critical industrial applications where particular importance is attached to measuring accuracy, reproducibility, long term stability and protection against dust penetration. The ConST211 has an accuracy of 0.02% of the calibrated span which is fully temperature compensated across the 20°C ± 3°C. And, -10°C to 50°C temperature compensation is for 0.05%FS. Applications Field gauge calibration Permanent outdoor installation Burst disc testing Pressure safety valve (PSV) testing Hydraulic torque wrench indication Torque data logging Pressure regulator testing Pipeline static pressure testing Pressure regulator testing Pressure switch testing Wellhead monitoring Filter performance testing Hydrostatic leak testi pressure gauge manometer Features Differential pressure is down to 0.6mbar (6mmH2O) Pressure Gauge pressure is up to 2500bar (37500PSI) Long working time: advanced micro power consumption. Battery power to 5,000 hours of continuous operation Measure speed is 3 times per second Strictly high & low temperature aging quality control process, and unique temperature compensation technology insures the gauge has the highest stability. Unique Self-protection capability technology Large, easy-to-read display with 5 digit resolution % pressure indication and additional bar graph for quick visual reference Stainless steel or Inconel cavity for aggressive media It is to be used in potentially explosive environments specified to EX ia IIC T4, the intrinsically safe option must be ordered for optimum safety. Specification manometer Ambient Environment Operating & compensation: -10°C to 50°C Storage Temperature: -20°C to 70°C Relative humidity: < 95% Atmospheric pressure: 0.86 1.06 bar Re-calibration period: One year (recommend) Accuracy 0.02%FS including non-linearity, hysteresis, repeatability and temperature effects for 20°C ± 3°C. Pressure units Pa, kPa, Kgf/cm2, inH2O, mmH2O, PSI, mbar, bar, MPa (In order to avoid the readings to overflow or too low to read, only some of pressure units are selected.) Battery The energy of ConST211 is supplied by a 3.6V alkaline battery. Measure Speed10 times/s3 times/s2times/s1 time/s Working hours300 hours600 hours800 hours1500hours Measure Speed1 time/2s1 time/5s1 time/6s Working hours2000 hours4000 hours5000 hours Media Compatibility 0 2.5 bar: Clean dry non-corrosive gases. 4 bar 2500 bar: media compatible with 316L SS.Over pressure warning: 120% Measure speed (0.2 10) times per second, default is 3 times/s Display 5 digits with 12.7mm character height Resolution Maximum five digits Pressure bar Graph In addition to the numeric pressure indication, the ConST211 LCD display contains a circular fifty-one segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. Analogue Dial Includes pressure swing, % indication, low/high alarm Minimum/Maximum Values The minimum and maximum pressure values can be displayed on the ConST211. This function can be enabled or disabled, and reset by the user. Alarm Output The alarm output is consisted by open drain field effect transistors. European Compliance CE marked (No.: AE 5015 6196 0001) RS232 Interface DB9, environmentally sealed Pressure Port M20x1.5 or 1/2’’NPT male thread (or customized) Dimensions Calibrator head only: φ112mm×40mm, Total height: 178mm Weight 580 gram approximate