PPN Polypropylene film Metal foil Capacitor Non-In

Polypropylene film Metal foil Capacitor Non-Inductive (PPN)CBB13*Construction Polypropylene film dielectric with aluminum foil electrodes, radial leads of tinned wire are electrically welded to the outer foil(or the contact metal layer) on the ends of capacitor winding, epoxy resin coating. *Features 1. High stability of capacitance and DF versus temperature and frequency. 2. Low DF and high IR 3. Non-inductive construction 4. High pulse rise rate (du/dt) and suitable for large current circuit *Application Most suitable for high frequency large current circuit and S-shaping correction in TV set. Widely used in high frequency, voltage DC and pulse circuits. Filter and noise suppression circuit. *Specifications 1. Reference standard: GB/10188 (IEC60384-13) 2. Temperature range: -40 105°C 3. Climatic Category: 40/85/21 4. Rated Voltage: 100Vdc,250Vdc,400Vdc,630Vdc 5. Capacitance Range: 0.001-0.47μF 6. Capacitance Tolerance: ±2%(G);±5%(J);±10%(K) 7. Voltage Proof:2.0UR(5s) 8. Dissipation Factor:≤0.1%(20°C 1KHz) 9. Insulation Resistance: ≥50000MΩ, C≤0.1μF,≥5000MΩ; C>0.3μF;20°C,100v,1min 10. Life Test: 1000hours at 85°C at 150% Rated Voltage