manual dispensing gun

manual dispensing gun Item no.:CGI-585-3-1 Cartridge: two-component Capacity: 585ml 3:1 Material: Iron Body,Stainless steel rod Weight: 1.45kg / piece Scope of application(tools): general glass assemble,such as glass,window,and doorsealing,repairing and bonding the joint of other construction materials,such as aluminum,tile,some plastic and woodother building or industryAdvantage:There are 3 strong- points of our plastic caulking guns:1. Low cost: Life duration is 5 times more than iron caulking gun.2.high-efficiency: The force is up to 270Kg-300kg and save your strength 5 times than common air caulking gun.3.Brand image: Not only our service of high-quality adhesive, but also high-quality concerned tools, our products are designed it. Suggested Use Materials:Epoxies, Acrylics, Silicones, Polyesters. Epoxy Acrylates, Hybrids, Urethanes. Polysulfides, foams, Polymers, polyureasInstructions:1, Open the swfit of handle and then pull the rack to reach the maximum. 2, Put into two-companent impression material cartridge.3, Promote the trigger to make the impression material come out smoothly from the cartidge 4, After using, put the rack back to the original location. 5, Remove the cartridge, then to repeat the above operation.