共同铁路测试

Common railtester CRI-200 test bench is the special device to test the performance of high-pressure common rail injector assembly, it is installed the BOSCH common rail pump to provide 0 2000 bar of rail pressure,it can test injectors of main producers:BOSCH,SIEMENS,DELPHI and DENSO. >>>CHARACTERISTIC: 1. Main motor drive adopts the frequency change to adjust the speed. 2. It is installed BOSCH common rail pump to provide 0 2000 bar ofrail pressure. 3. The drive signal percentage can be controlled. 4. Protection function of short-circuit. 5. The rail pressure can be tested in real time, it contains thehigh-pressure protection function. 6. Pulse and frequency of the injector drive signal can be adjusted. 7. The injection time can be setted. >>>FUNCTION: 1. Test the max. oil quantity of high-pressure common rail injector. 2. Test the cranking oil quantity of high-pressure common railinjector. 3. Test the backflow oil quantity of high-pressure common railinjector. 4. Test the average oil quantity of high-pressure common railinjector. 5. Set the high-pressure common rail injector' injection state and oil quantity measure. >>>Technical Parameter1. Test frequency of injector: 50-3000rpm; 2. Pulse width: 0.1-200ms; 3.Test injection time: 1-300s; 4.Rail pressure: 0-200mpa; 5.Graduate: 120ML; 6.Input power: AC 380V/50HZ/3Phase or 220V/60HZ/3Phase or on request; 7.Fuel temperatue: 40°C; 8.Overall dimension: 1200MM×800MM×1600MM; 9.Weight: 400KG.