FA1266棉花查证件的机器

cotton carding machineis the the fusion of foreign advanced technology,The production is higher by 30% than other similar ones, with high cost performance ApplicationThis machine is suitable for the processing of cotton fiber, chemical fiber and blended fabric. You can use this machine to loose, card, remove impurity, mix the cotton (chemical fiber)roller or the cotton (chemical fiber)layer supplied by cotton box which has a certain uniformity made after cotton cleaning process and get rid of the short fibers and impurities. Then gather them into cotton strips with a certain specifications and put the cotton strips in the canister for the using of next process. Main specifications and technical features: 1. The scope of application: the pure cotton, chemical fiber and blended fabric with the fiber length of 22-76mm 2. feeding cotton weight:350-1000 g/m 3. Working width1000 mm 4. Total draft ratio: 70-130 times 5. Quantitative cotton sliver:3.5-6.5 g/m 6. Maximum stripping speed240 m/min 7. Actual maximum output93 kg/h 8. Working speed of licker-in250 mm 9. Working speed of cylinder1290 mm 10. Working speed of cylinder360-500 r/min 11. Working diameter of doffer706 mm 12. Working speed doffer10-65 r/min 13. Number of reverse cover plate (working cover plate/total number of cover plate)30/82 14. Speed of the cover plate133-278 mm/min 15. Number of fixed cover plate: 4 front 7 back 16. Cotton mesh cleaner: 1 front 2 back 17. Type of matching coiler: manual or rotary typed three-position automatic canister changing 18. Specifications of matching canisterΦ600x900Φ600x1100 19. Continuous suction air volume of single machine3500-4000 m3/h 20. The whole machines power10.19 kW 21. Overall dimensionLxWxH3200x1975x2160(exclude coiler) Long-term, short-term autoleveller system The system is mainly used to control the feed roller speed by testing the output slivers and the thickness of fed layers, form a closed loop front-rear control system to realize the long, short-term autolevelling and stabilize and improve the evenness of slivers. Electrical control Adopt combined control system such as man-machine interface, the PLC and the autoleveller for the electrical control system; by adjusting the speed of the doffer and the feed roller, to make them run pro rata. The touch screen is fixed on the left cover in the front of the machine, convenient for operation; it also can display all functions and faults and can be used to set the relevant technology parameters.