E1 & V.35 Fiber Modem

E1 & V.35 Fiber Modem Overview FBOM1000 series Fiber Modem can modulate G.703 E1 signal or V.35 signal to single-mode or multimode fiber which extend the transmitting distance of E1 signal greatly. E1 signal support framed and unframed mode. When in framed mode, continuous or discontinuous time-slot can be selected. E1 fiber modem and V.35 fiber modem can be used together. Both of them are widely used in extending user interface in ATM or DDN. Features Realize E1 or V.35 signal transmitting over fiber; transmitting distance can reach 120Km without repeater E1 interface: Framed & Unframed optional, 75 & 120ohm selectable V.35 interface: support N×64K bit rate,DTE & DCE optional Three loop back mode selectable: Local loop back, diagnostic loop back, remote loop back. Provide bit-error test and time-slot follow by remote equipment, which brings a lot advantage in setting and debug Multiple clock selection: Local clock, Fiber line clock, E1 recovery clock, V.35 line clock Standalone and Chassis optional Management Support Console, WEB and SNMP management Provide Timing Mode Setting, Loop back mode setting, Framed or Unframed mode setting clock resources selection, and etc. Provide environment parameter monitoring, including power supply status and device operation temperature Show details of system information, including Chassis name, location information, IP address, start-up time, software and hardware version View & configure the working status of local and remote device, including connection status, port status Specifications Fiber interface Rate: 4Mbps Line code: 1B1C Wavelength: 850nm/1310nm/1550nm Connector: FC/SC/ST Distance: 0-120Km V.35 interface: Compliant with V.35 standard Rate: n×64Kbps, n=132 Physical connector: DB25 female jack DCE & DTE optional E1 interface Compliant with ITU-T G.703, G.704, G.823 Rate: 2.048Mbps±50ppm Impedance: 75 ohm unbalanced & 120 ohm balanced Physical connector: BNC for unbalanced & RJ45 for balanced Framed & unframed selectable Support PCM30 & PCM31 Power AC Input: 100 240V DC Input: -48V Environment Operation Temperature: 0 50 Operation Relative Humidity: 0 90% Store Temperature: -20 65 Store Relative Humidity: 0 95% Oder Information P/N Description F9-E1 E1 fiber modem F9-V.35 V.35 fiber modem FC-416 16 Slots Chassis, Supply two Powers FC-416M Management Module for the FC-416 Chassis