60W 15V 4A single output switching power supply

60W 15V 4A single output switching power supply1. 105oC Output capacitor 2. AC input power suitable for the world 3. High efficiency and low operation temperature 4. Soft-start current can reduce the AC input impact effeciticly 5. With short-circui and overload protection 6. Compact size, ligh weight 7. 100% full-load burn-in test 8. Installed with EMI filter, minimum wave ModelS-60-5 S-60-12S-60-15S-60-24DC output voltage5V12V15V24VOutput voltage rang(Note:2)±2%±1%±1%±1%Rated output current12A5A4A2.5AOutput current range0-12A0-5A0-4A0-2.5AWave and noise(Note:3)120mVp-p120mVp-p150mVp-p150mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±1%±0.5%±0.5%±0.5%DC output power60W60W60W40WEfficiency72%76%77%79%Adjustale range for DC voltage+10,-5%+10%+10%+10%Input current1.6A/115V 0.8A/230VAC Inrush currentCold-start current 30A/115V 60A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise, hold up time800ms, 50ms, 10ms/115V 300ms, 50ms, 80ms/230VACVibration10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVACWorking temperature and humidity-10°c +60°c Refer to output derating curve, 20% 90% RHStore temperature and humidity-20°c +85°c, 10% 95%RHWeight0.5KgsSatety standardsUL 1012 TUV EN6050(IEC, UL 1950) ApprovedEMC standardsCISPR22(EN55022), IEC801-2,3,4 IEC555-2 VerficationNote: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70% RH.Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3.Wave test: adopting "A12" double wire for 20 MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: wht is overload, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%