600W switching mode power supply (SP-600-27)

600W PFC switching mode power supplyCompetitivedprice and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-600-12S-600-13.5S-600-15S-600-24S-600-27S-600-48DC output voltage12V13.5V15V24V27V48VOutput voltage range(Note:2)±1%±1%±1%±1%±1%±1%Rated output current50A44A40A25A22A12.5AOutput current range0-50A0-44A0-40A0-25A0-22A0-12.5AWave and noise(Note:3)150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p200mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%DC output power600W600W600W600W600W600WEfficiency83%84%84%85%86.5%87%Adjustable range for DC voltage10 13.2V12 15V13.5 18V20 26.4V24 30V41 56VInput current12A/115V 7.5A/230VAC inrush currentCold-start current 25A/115A 50A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoverySetup, rise , hold up time±0.03%/°c(0 50°c)Vibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight2.1KgsSafety standardsMeet UL 1950 requirement (Not apply for the mark)EMC standardsCISPR22(EN55.22), IEC1000-4,2,3,4,5,6,8,11IEC1000-3-2Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%