200W switch power supply (S-201-24)

S-201 seriesSwitch power supplyCompetitivedprice and high reliability105oC Output capacitorAC input power suitable for the worldHigh efficiency and low operation temperatureSoft-start current can reduce the AC input impact effecticlyWith short-circuit and overload protectionCompact size, ligh weight100%full-load burn-in testInstalled with EMI filter, minimum waveModelS-201-5S-201-7.5S-201-12S-201-13.5S-201-15S-201-24S-201-27S-201-48DC output voltage5V7.5V12V13.5V15V24V27V48VOutput voltage range(Note:2)±2%±2%±1%±1%±1%±1%±1%±1%Rated output current40A26.5A16.5A14.7A13A8.3A7.4A4.2AOutput current range0-40A0-26.5A0-16.5A0-14.7A0-13A0-8.3A0-7.4A0-4.2AWave and noise(Note:3)150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p200mVp-p240mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±1%±1%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%DC output power200W198.75W198W198.45W198W199.2W199.8W201.6WEfficiency74%79%80%80%81%83%83%84%Adjustable range for DC voltage4.5 5.6V6 9V10 13.2V12 15V13.5 18V20 26.4V26 32V41 56VInput current3.6A/115V 1.8A/230VAC inrush current25A/115V50A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryHigh-temperature protectionERH3≥90°c output shutdownTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time200ms,100ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight0.9KgsSafety standardsDesign ferer to UL 1950EMC standardsDesign refer to FCC Part15 J Part15J classANote: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70% RH.Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3.Wave test: adopting "A12" double wire for 20 MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: wht is overload, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%