ZP50-9 планшетных формовочная машина, чай таблеточный пресс

Application 1, suitable for pressing of round, lump, spherical and annular tablets from granular materials. 2, widely used in foodstuff, chemical, and electronic industries. 3, cannot be used to press semi-solid, wet granule, low solubility, hygroscopic or powder materials. 4,meets the GMP requirements. 5, The drill drift and drift pin are built-up type. Working Principle and Characteristics 1. Machine drive: motors (step-less speed regulation is controlled by inverters) → pulley driven→ worm driven→ turntable driven by the spindle for rotating clockwise. 2. The technological process for tablet pressing of this machine is material feeding, filling, tablet pressing and tablet out continuously. 3. During the operation process , turntable with 9 sets die drives for rotating clockwise. The up and down punch die moves up and down along the curve track 4.Up and down roller rolling friction installations will help reduce resistance and lower power consumption. 5. install the safety roller unloading device on the axle of down roller, balanced by a spring. When over-pressure occurs, the spring housing will automatically unload, and electric cabinet will issue the warning alarm signal 6. Filling, film thickness, rotational speed and other various parts are regulated by centralized control unit for easy operation. 7. The worm and worm gear are in totally submerged lubricant to reduce power loss and extend service life. 8. The external part of the machine is fully-enclosed to isolate the air-tight pressing room with driving unit to avoid dust and oil contamination. 9. The electric control uses variable frequency step-less speed regulation for easy operation. Operation panel is simple and clear. 10. Dust collector is installed to remove dust automatically. Certificate: ISO9001:2000, MEET THE GMP REQUIREMENTS Technical Parameters Dies9 setsDia. of up and down punch poleΦ50mmMax Pressure200KNRange of tablet pressingpressΦ50*20mmballΦ50mmblock40*18*20mmMax Filling Depth48mmTurret Speed0-12/ r/minMotor Power5.5kwDust Power2.2kwMax Production Capacity6480/ pc/hOverall Size (L*W*H)790*780*2200MMNet Weight1800kg