жидкость RTV силиконовый

Liquid RTV siliconerubberapplication: Liquid RTV silicone rubber compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica. Liquid RTV silicone rubber feature description: A.WorkabilityThe base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.B.Mold-releasabilityThe cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.C.Dimensional stabilityThese rubbers offer good dimensional stability, with little shrinkage.D.FlowabilityThey have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.E.Heat and chemical resistanceThese rubbers have outstanding resistance to heat and chemicals.F.Deep-section curabilityMoldmaking RTV silicone rubber compound cures uniformly throughout the mold, regardless of thicknessG.Non-exothermicNo heat is generated during curing, meaning no adverse effects to the original.Molding silicone rubber operationsIf the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On thecontrary,if the mold with fine and precisionpatterns,it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer.If molds requiring fast drying and demold, more curing agent is needed; contrarily,if molds requiring slower drying and demold, less curing agent is needed. CERTIFICATION: ISO9001: HK05/01358 SGS:GZ0606100461/CHEM RoHS:BTRS091718751 Patent:ZL200520001597.8 Any further information of modling silicone rubber required orsuggestion, pls feel free tocall Mr.Jensen TEL: 0086-755-89948013 and0086-13410935459 FAX: 0086-7-5589948030 Welcome to our websitefor further information www dot szrl dot net