Запчасти Химический продукт Машины

This company produces reinforced nylon stabilizer, the maximum diameter Φ58mm, length Φ125mm, apply Φ25, Φ22, Φ19 rod to use, the card does not occur anywhere in the sucker rod,resolving the long-standing unresolved wells in Zhongyuan Oilfield partial abrasion, extend tube, rod, pump life and reduce the operating frequency, significantly reduce the cost of crude oil production, but also played the role of scraping wax. The products is serve nylon as the main raw materials and foreign recipes, they are produced with a stabilizer, plasticizer, anti-aging agent, reinforcing agent and other raw materials. The design was streamlined, with the oil flow passage, with good wear resistance and self lubricating, light, temperature, crude oil has a good corrosion resistance, its mechanical properties with tensile, compressive, impactthe advantages of high strength, weight does not increase pumping capacity.Technical Standard NamePerformanceAppearance Light yellowRatio 1.14Tensile strength MPa54-78Compression strength MPa60-90Bending strength MPa70-100Hardness (Rockwell R)85-114Melting point °C215-223Linear expansion coefficient 10-5/C7.9-8.7Water absorption rate %1.9-2.0Lock tight power KN40Horizontal force KN22.8Vertical force KN55.6 Stabilizer and sucker rod centralizer assembly method: 1, hot charging method: the temperature at 80-100 ° C mounted on the rods within the preheating. 2, cold installation method: in room temperature, fitted to the rods. JTF-type anti-corrosion coupling carbon fiber stabilizerJTF-type anti-corrosion coupling carbon fiber stabilizer Puyang Dali Technology Development Co., Ltd developed anti-corrosion coupling carbon fiber stabilizer, effectively solve the partial wear in pumping well,it is a partial wear patent product (patent number: ZL2005200305148). First. Features: 1, mixing nami-materials and carbon fiber, develop the centralizer sleeve through special process, with little friction, no dregs after wear. 2, coupling with short excerpts, use high quality steel and develop through a special process, the advantage of extending the time, long life and relatively low cost. Second, product photos: Three principles: The centralizer connected to the rod, the use of diameter greater than the rod centralizer collar diameter play righting effect, the use of high-strength wear carbon fiber and synthetic and plastic tubing centralizer body exposure to wear reduce tubing wear, in order to achieve the purpose of preventing eccentric wear. The use of spiral groove righting wear achieve the head of the CIA role in scraping wax and can prolong life. Four, the use of the field: Since February 1999 at the Oil Production Plant ofzhongyuan oil field with favorable results. Since June 2000 at Shengli Oilfield, the use of all oil production plant has been considered to be pumping well against the eccentric wear ideal.