Закалка машины (Индукционная закалка машина)

Tempering Machine heat treatment Equipment slewing bearing quenching machine,induction hardening,can be equipped with IGBT or thyristor power supply quenching machine-- slewing bearing guide The quenching machine adopts an obliquely vertical type, has an included angle of less than 70 degrees with the horizontal plane, and is a steel frame welded structure. Work-pieces adopt the support of a way of four-point positioning with transverse beam structures, two roller wheels of the lower transverse beam are driving wheels and adopt the working mode of supported type supporting work-pieces Positioning of slewing rings: the lower transverse beam of the machine has two identical carrier rollers which are synchronously driventhrough a servo motor at the right side of the transverse beam; and the two carrier rollers are driven to move by a carrier roller moving motor at the right side of the machine to meet the requirements of adjusting slewing rings with different diameters. The upper transverse beam and lower transverse beam can be electrically driven to move up and down to adjust the circle center of the slewing rings to be on a horizontal line with quenching induction coils. The working mode of the quenching machine: an inductor is positioned at the outer side of a working track when an outer raceway ismachined, and is positioned at the inner side of a work-piece track when an inner raceway is machined; the right roller wheels on the uppertransverse beam and lower transverse beam are respectively driven by one servo motor, and the splined shaft drive is adopted between the two roller wheels; the roller wheels drive the work-piece to rotate when in working, the work-piece is quenched continuously, and the inductor enables a crisscross sliding table to automatically track to and fro and left and right by a PLC through a floating mechanism. Ø Track quenching machine configuration Machine structure: Oblique vertical type Rotation mode:Four-roller drive Working mode : Suspensible type, supported type Quenching speed: Touch screen/CNC setting Induction coil and working clearance:Bidirectional automatic tracking, and the tracking accuracy is 0.1mm, (It also can adopt the mechanical tracking method.) Electric control: Touch screen and PLC/802C/802D/840D (Select according to the requirements of the users.) Big/small work-piece adjustment:Adjusting roller and transformer slipway Display: Quenching speed, cooling water temperature, quenching fluid temperature, tracking deviation value Heating power:Controllable silicon/transistor Driving motor: Speed reduction motor/alternating current servo motor Number of shafts: 4 (small size is 3) Number of work stations:1(one (two is optional: when one is for quenching, the other one is for loading and unloading) ) Machine adaptability: olny adopt track quenching Quenching quality and consistency:good ProjectUnitsEquipment ModelHKVP80HKVP100HKVP160HKVP250Maximum machining outer diameter of quenchingwork-piece diametermmφ800φ1000φ1600φ2500Minimum machining internal diameter of quenchingwork-piece diametermmφ200φ200-600φ200-800φ200-800Maximum weight of quenching work-pieceKg1000100010001500Quenching speed of work-piecemm/min0 5000 5000 5000 500Power of heating power supplyKW100/160100/160100/160100/160Cooling water system of equipmentsetHKFL 250HKFL 250HKFL 250HKFL 250Quenching liquid cooling and circulating systemsetHKFL-250/liquid return pumpcontainedHKFL-250/liquid return pumpcontainedHKFL-250/liquid return pumpcontainedHKFL-250/liquid return pumpcontainedMachine powerKW3.53.5810Power supply capacity of machineKVA551013External dimension (length * width * height)mm2800x1900x21002800x1900x21002400x2100x28002400x2100x3300