Заготовка для измерения диаметра инструмента

Workpiece diameter measuring instrument is the high-accuracy survey installment that uses the laser scan to carry on Non-contact the on-line measure. Mainly used in the diameter measurement of workpiece. 1. Technical parametersModelMeasuring rangeDifferentiationAccuracyLDM-200.1-20mm0.00010.00052. The performance indicators Measurement: Laser scanning Laser: Visible red semiconductor laser Laser output power: <2mW Operating voltage: 220V ± 15% 50 - 60Hz Operating temperature: -10 40 °C Humidity: <85% RH Work mode: continuous Power consumption: <30W External dimensions: Dimensions: LDM-20 Measuring head: 500mm (length) X 120mm (W) X 55mm (high)3. The Device with the following Characteristics i. Can be connected PLC, industrial computer. ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect. iii.Can be equipped Display controller DDC-54. Display Controller (Model:DDC-5)i. It be used to display and control. ii. It's suitbale for Laboratory use. iii. It will alarm,when the diameter go beyond the the set tolerance. iv. With RS485 It can connect to PLC industry controlling computer. Dimensions: 100mm×100mm×120mm (Model:DDC-5) Installation hole size: 90mm×90mm (Model:DDC-5)Display Controller (Model: DDC-5)