YGM шлифовального оборудования

grinding equipment - High Pressure Suspension mill High Pressure Suspension mill is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc. grinding equipment working principle: When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment. Characteristics: 1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring. 2. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh). 3. High Pressure Suspension Mill meets the requirement of national dust-dump standard. 4. The separator can be adjusted very easily. 5. The multi-class seals are adopted to keep the grinding equipment tightly closed. Technical data: ModelPiece of rollerSize of the roller (mm)Size of the ring (mm)Feed size(mm)Fineness of powder (mm)Capacity (t/h)Motor power (kW)Weight (without motor)(t)YGM653Φ210×150Φ650×150≤150.033-0.6130.4-1.8153.6YGM753Φ260×150Φ780×150≤150.033-0.6131-318.54.8YGM853Φ270×150Φ830×150≤200.033-0.6131.2-4228YGM954Φ310×170Φ950×170≤250.033-0.6132.1-5.63714YGM1305Φ410×210Φ1280×210≤300.033-0.6132.5-9.57524Notice: Any change of High Pressure Suspension Mill technical data shall not be advised additionally.