WDM медиаконвертер

WDM Media Converter Gigabit optical transceiver! This product supports IEEE802.3Z/AB 1000Base-SX/LX protocol,.the working mode of duplex full mode and half mode. The electric outlet is adaptive to the rate of 1000M.Gigabit optical transceiver . This manual is for various models of adaptive 1000Base-T optical transceivers and 1000Base-T optical transceivers. The following purchasing guide is for customer to refer to. Figure 1 Schematic drawing of connection Explanation for 1000M LED indicator LED indicator indicates the working status of the transceiver for device monitoring and trouble display. The following is the explanation for each LED indicator. LED indicator Status Explanation TP100 On Lit when TP speed is 100Mbps TP1000 On Lit when TP speed is 1000Mbps TP FDX On Lit when TP full-duplex mode is active. Off when TP half-duplex mode is active. Blinks when collision signal is present. TP Act On Lit when TP connection is good. Blinks when TP data is transmitting. FX Act On Lit when FX connection is good. Blinks when collision signal is present. PWR On Lit when +5V power is coming up. rate of electrical interface is 10MBps. Figure 2 Schematic drawing of connection Explanation for 10/100/1000M LED indicator LED Color Function TP Act Green Blinks when TP data is transmitting TP Fdx Green Lit when TP full-duplex mode is active Off when TP half-duplex mode is active Blink when collision signal is present TP 1000/LINK Green Lit when TP connection is 1000Mbps Off when TP connection is10 or 100Mbps FX 1000/LINK Green Lit when 1000Base-x connection is good PWR Green Lit when power is coming up