высокое качество армирования сетки сварной машины

reinforcing wire mesh welded machine/construction mesh welding machine Introduction: Line and cross wire are pre-straightened and cut to length. Mesh welding lines for production of engineered fabric and special sheets, offering very short changeover times for most efficient production even of very small number of sheets. Processing of cold and hot rolled wires and bars. Usage of the reinforcing mesh panel: For fencing mesh which used for highway, railway and various function of protection. For construction which used for basis of high building, roof mesh, floor mesh. It is also widely used in agriculture and poultry mesh, farming mesh and so on. Features: 1. All the pneumatic components used are with world famous brand. For European customers, it is very easy to get the parts locally. 2. PLC controlled. Easy to set and control. It makes this machine more intelligent and reasonable. 3. The greatest advantage is possible to adjust the distance of line wires at random on the same mesh panel. 4. The welding wire diameter is able to be made to orders. The range of our mesh welding machine is from 0.3mm to 12mm. Material can be stainless steel wire, galvanized wire, plain steel bar, cold rolled rebar, hot rolled rebar. 5. The machine line automatic degree can be according to request. For the economical type, line wire and cross wire are pre strengthened and cut to length. We capable to produce fully automatic machine. Main parameters: Wire mesh panel width ≤3300mm Wire mesh panel length Any length Wire diameter φ5-φ12mm Line wire distance 50-300mm Cross wire distance >=50mm Welding speed 60-120 rows /min Voltage 380V 50Hz Compressed air 0.8MPa 6m3 /min Wire material Low carbon steel wire Wire surface status Clean surface, steel wire or galvanized wire Wire wastage 0%