высокая скорость резьбонакатные МАШИНА

thread rolling machine is used to make parallel thread on rebar head with diameter from14mm-40mm.we have kinds of JBG-40K JBG-40B JBG-40D JBG-50 thread rolling machine. Easy to operate and quick to make parallel thread on head of rebar. Our products are cheap and have good quality. Thread rolling machine technical data JBG-40K It not only adjusts freely in the range 14-40mm using the rib-stripping plate but also eliminates the problem that the rebar head with screw head often becomes bigger, further guaranteeing the construction quality. Electric motor power: 4KW gross weight: 500KG Work voltage: 3-380V50HZdimension: 1250*1050*750mm Rotate speed: 60r/minsteel bar standard: 14-40mm Thread pitch: 2.53.03.5 max thread length: 65mm JBG-40D It is easy to adjust; it adds the screw pitch angle mechanism. It is especially fit for the rebar splicing in bridge-piles and tunnel construction Electricmotor power: 4KW gross weight: 450KG Work voltage: 3-380V50HZ dimension: 1250*1050*750mm Rotate speed: 60r/minsteel bar standard: 14-40mm Thread pitch: 2.53.03.5 max thread length: 100mm JBG-40B It features that in the same pitch range, the rib-stripping plate can be adjusted freely. The rebar head with screw thread is standard, precise and the service life of the machine is extended. Electric motor power: 4KW gross weight: 500KG Work voltage: 3-380V50HZ dimension: 1250*1050*750mm Rotate speed: 60r/minsteel bar standard: 14-40mm Thread pitch: 2.53.03.5max thread length: 65mm Technical data Electric motor power Gross weight Work voltage DimensionRotate Speed Steel bar standard Thread pitch Max thread length JBG-40K 4KW 500KG 3-380V 50HZ 1250*1050*750mm 60r/min 14-40mm 2.5 3.0 3.5 65mm JBG-40D 4KW 450KG 3-380V 50HZ 1250*1050*750mm 60r/min 14-40mm 2.5 3.0 3.5 100mm JBG-40B 4KW 500KG 3-380V 50HZ 1250*1050*750mm 60r/min 14-40mm 2.5 3.0 3.5 65mm