Встроенная для Ipod Touch (4-го поколения) - RadPlaid острый

* Original fabric-wrapped patterns give your iPod touch a fabulous tailored look * Form-fit two-piece hard shell case design protects from scratches and scuffs * Access to all buttons, controls, sensors and connections Usage: To remove this case, face the iPod with the screen towards you. Start on the right side of the case, about an inch down from the top. From the inside (over the screen, not the outside!) gently pop the front of the case up. Once you have a bit of separation of the two pieces on the right side, work around to the top next, then to the left side and bottom, and gently pull the two pieces apart. It is much easier if you start from the inside/screen side, than from the outside of the case! Use your fingers, or gently use a guitar pick or credit card to help pop it off. The trick is to start from the inside (screen side)- and it works best if you start on the right side and go counter-clockwise.