Вращательного крыла сухой дистанционного передачи холодная вода м

Measuring the vlounme of portable water passing through the pipeline and remote transmitting the signal of the water volume to the secondary instrument. Feature Rotary-vane dry-dial type.Magnetic drive,Keep its fundamental function as standard meter.Easy for reading and keep the reading clear in a long-term service.Keep free from frost and have long working lifr.A signal will be transmitted when 10(or 100 or 100/3)lites water passing.MAIN TECHNICAL DATATypeMeter Size Dia DN(mm)Classqs Overload Flowqp Nominal Flowqt Transitional Flowqmin Min FlowM3/hLXSG-15Y15A31.50.150.06B0.120.03LXSG-20Y20A52.50.250.10B0.200.05LXSG-25Y25A73.50.350.14B0.280.07LXSG-32Y32A126.00.600.24B0.480.12DIMENSIONS AND WEIGHTTypeMeter Size Dia DN(mm)LengthWidthHeightConnecting Thread DWeight kgmmLXSG-15Y1516599124G3/4B1.5LXSG-20Y20190/19599124G1B1.7LXSG-25Y25225103132G11/4B2.4LXSG-32Y32230104137G11/4B2.7ERROR CURVE In the lower zone from Qmin in clusive up to but excluding Qt is ±5% In the upper zone from Qt inclusive up to and including Qs is ±2%SIGNAL WIRESTYPEWIRE CLOLRRED(WHITE)BLUE(BROWN)BLACK(YELLOW)TWO-WIRETRANSMITTINGTRANSMITTINGTHREE-WIRE REED SWITCH COUBLE-TRANSMITTINGTRANSMITTINGTRANSMITTINGPUBLIC ENDTHREE-WIRE REED SWITCH BURGL ARPROOFTRANSMITTINGBURGL ARPROOFPUBLIC ENDHOL COMPONENT TRANSMITTINGPOWER SUPPLYSIGNALGROUND WIREWorking Condition Water temperature ≤40oC (Palease use hot pulse transmitting water meter whenwater temperature ≤40oC≤t≤90oC) Working Pressure≤1MPa Do not immerge water meter into water. SIGNAL TYPE Signals are transmitted by reed switch or HOL component. Note The working current for HOL Component is about 5mA. Please advise if the required woking current less than 50uA(dipole)or 50uA(monopole).INSTALLATION REQUIREMENTS To clear the pipeline before installation. Must be installed in horizontal pipelines and the letter shall be uptumed and made the arrow on the body have the same way with the water flow. Must be installed in a dry place and easy for removing and maintenance. Suggest installing in a special water meter box. Valves shall be installed fore-and-aft the water meter.