Волоконно-оптический разъем и кабель Ассамблеи

Features and Benefits Comply with IEC 61754-4, IEC 61754-13, IEC60874-14,TIA/EIA-604-12, IEC61754-18 Adapter variants: Simplex and duplex, Ceramic ferrule and metal body Adapter housing material: Composite plastic or nickel-plated metal or plastic alloy available Adapter C-sleeve material: Ceramic Color rule for composite plastic adapter:Blue - SM, Beige – MM, Green – SM APC Key dimension:Wide-key (2.15mm) or narrow-key (2.05mm) Installation: With or without mounting flange;Square or D-D mounting flange Ferrule detail:Circular 2.5mm;8° angled-convex polished or convex polished;Step-ferrule or conical-ferrule form available Single-mode 9/125um, multi-mode 50/125um, 62.5/125um and OM3 (LOF 50/125um) Cable diameter: 0.9mm/1.6mm/1.8mm/2.0mm/3.0mm Cable jacket material: Riser/Plenum/LSZH Operation Conditions Ambient Temperature:-40°C +70°C Relative humidity:100 % (0°C 35 °C) 75%(>40°C) Atmosphere pressure:70 kPa 106 kPa Technical Performance Adapter Insertion Loss: <= 0.2dB against reference connectors Insertion loss: typical 0.20dB, maximum 0.40Db Return loss: min. 65dB Max. Apex Offset: 50um Fiber High: spherical +/-100nm Fiber Roughness: max. 50 nm Ferrule Roughness: max. 50nm Angle: 7.5°to 8.5° Key Error: +/-0.5° Mating cycles: >=1000 times Cable tension resistance: >= 100N Technical Performance Adapter Insertion Loss: <= 0.2dB against reference connectors Insertion loss: typical 0.20dB, maximum 0.40Db Return loss: min. 65dB Max. Apex Offset: 50um Fiber High: spherical +/-100nm Fiber Roughness: max. 50 nm Ferrule Roughness: max. 50nm Angle: 7.5°to 8.5° Key Error: +/-0.5° Mating cycles: >=1000 times Cable tension resistance: >= 100N