воды на входе клапана используется в стиральной машине

SpecificationsThis type is widely used in solar energy water heater system. Your design are accept.solenoid valve, brass solenoid valve, hot water solenoid valve, water vavle, shower solenoid valve, irrigation valve, washing machine solenoid valve, plastic solenoid valve, valve, hydrant valve, solar valve, hydraulic valve, water heater valveModelFCD.3-148UAction wayPilot typeTypeNC self-holding (at impulse voltage)Working pressure0.02MPa-0.8MPaConnection wayΦ15 male thread inlet & outletApplicable mediumWaterValve body materialPlasticMedium temperature0-50oCEnvironment temperature0-40oCRated voltageAC220V, AC110V, DC110V, AC48V, DC48V, AC36V, DC36V, AC24V, DC24V, AC12V, DC12V, DC9VImpulse 4.5V, impulse 3.6VVariable voltage of supply voltage-10% 10%Insulation resitsanceTested by DC500V megohmmete for 1 min, the insulation resistance should ≥100MWatertight performanceHydrostatic pressure 0.02Mpa, leakage ratio<0.1mL/minHydrostatic pressure 0.03 0.8Mpa, leakage ratio 0mL/minHydraulic pressure withstandWithstand hydrostatic pressure of 1.2MPa for 5min, no unbroken, deformation or outside leakageReliability0.01 0.02MPa,make and break for 10s respectively, lasting 1h, the check valve should be unblocked.Flow characteristicsPressure 0.02Mpa Flux >3L/min; Pressure 0.1Mpa Flux>8L/min;Pressure 0.3Mpa Flux >13L/min; Pressure 0.8Mpa Flux >25L/minAcross layers insulationWithstand high voltage pulse for 2s, it should be normal.Continuously energizedEnergize for 12h, but not connect through the water, the valve should be no deformation, and the coil should not be burned;