водонепроницаемого нейлона клей

I. Properties:(1) Appearance: translucent paste (2) Composition: macromolecule copolymer latex II. Characteristics(1) Wearable, good washing fastness (2) Having no covering power (3) It is ecstatic, soft hand feeling (4) Smooth and lustrous surface, good screen-passing propertyIII. Application scope: If only P39A Waterproof white nylon white glue is used, it is only suitable for printing on light or white colored waterproof nylon fabrics.IV. Reference formula:1. When it is used singly100 percent of P39A Waterproof nylon transparent glue 3 to 5 percent of bridge agent+ 100 2. When it is used for printing on medium and light colored nylon fabrics:40 to 60 percent of waterproof nylon transparent glue 35 to 55 percent of waterproof white nylon white glue X 3 to 5 percent of bridge agent+ 100 V. Printing processesIt should be overprinted at least 2 times in order to have a smooth surface and a vivid and bright effect.Printing processes: Printingblow dryingprintingbakingfinished product VI. Precautions: (1) 120 meshed screen printing should be used (2) Before use the waterproof white nylon white glue, it is necessary to add 3 to 5 percent of bridge agent into it and mix them. (3) After P39A waterproof white nylon white glue is added with bridge agent, it must be within 5 hours; therefore, it should be prepared according to the actual amount to be used. (4) It is better to bake the finished product under a temperature of 150 for 2 minutes so as to have a better fastness; if it is dried in natural air, it should be dried for at least 7 days to reach the necessary fastness. (5) The Quality guarantee period is 6 months under room temperature.