Водный Система рисования YS-WB

Specification of Waterborne Paint System YS-WB-AYS-WB-BYS-WB-CYS-WB-DBody Made by 1.5mm steel plate, powder coated. Colour: white Made by quadrate steel, powder coated. Colour: white Nozzles 10pcs nozzles for each box, diameter of nozzles is 30mm 18pcs nozzles for each unit, diameter of nozzles is 30mm New style jet, each box has 2 nozzles Ventilation System Top intake, bottom blow, single-intake centrifugal fan, air capacity: 1400 m3/h Intake through fan and duct, body blow, 2 boxes with one single-intake air centrifugal fan, air capacity:3300m3/h Intake through fan and duct into airproof pipe, body blow, one single-intake air centrifugal fan, air capacity:3300m3/h Take high pressure air produced by air compressor as power air, fresh air inside booth as blowing air, air capacity of each nozzle is 900 m3/h Filtering System Intake fibreglass filter. Intake pre-filter Control System fan operation nozzles switch. Installation Statement Installed in the corner, usually 4 pcs as 1 unit. Its also optional, each unit can work separately(installed in the middle of side wall is also available). Installed in ceiling side of spray booth, integrated with ceiling lights. Working as partial waterborne paint curing system, its movable at will. Working Principle Statement Waterborne paint is solvent in pure water, which has safe, environmental protective advantage compared to normal paint. But the volatility of pure water is not good, so we develop waterborne paint system. High speed airflow from nozzles of this system can fasten air speed of painting goods surface so as to dry water from paint fleetly.