Вода кольцо резки Пластиковые гранулирования машина

Main advantages of this Plastic Pelletizing Machine It adopts water-ring cutting technology. For this, it improves the production capacity much. The whole line includes extruder, water-ring cutting device, conveyor, water removing device and water pump. Main technical data: Feature:1. Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA, nitrided and polished 2. Gearbox: Surface heat quenching and tempering /Auto. Oil lubricated 3. Cooling of barrel: air cooling by fan (when the temperature is too high, the blower will blow the barrel to low the temperature). 4. Heating of barrel: Automatic temperature controlling system (digital temperature controller + AC contactor) 5. Speed adjusting method of main motor: frequency inverter 6. Speed adjusting method of water-ring cutting motor: frequency inverter 7. Speed adjusting method of forced feeder motor: frequency inverter 8. The screw is specially designed for soft film because it can make the exhaust of hot gas (two exhaust hole) 9. The barrel is special designed for moisture exhaust so it is possible to use material with water(water maximum 5%) 10. Filter changer: hydraulic-driving and two stations to put the metal net (non-stop type) Extruder Screw Diameter:¢100 up to¢150 MM Screw ratio: L/D 25: 1 Barrel cooling fan: (2-4) x 0.35 KW Main motor: 30 KW up 55 KW Heating Control: 3 zones up to5 zones Electrical Heating capacity: 10 KW up to 20 KW Screen changer Heating control (zone): 1 Electrical heating capacity: 2 KW -4 KW Water-ringCutting and Cooling System Shape of the die: Round Number of the cutting blade: 4 AC inverter motor for cutting blade: 0.75KW Water-ring material: stainless steel Dewater Device Dewater motor power: 2.2 KW Water Pump: Pump Motor: 2.2 KW