вибросито с кулером

Our newly developed vibration-conveyor presents following unbeatable advantages: 1 . Smooth transportation of produced pellets. 2 . Pellets will be sieved out of dust. 3 . Temperature of pellets will be cooled down. The special low input height of 500 mm effects on an impeccable output, even if the outputs are situated in a lower position. The pellets are transported in a smooth way by the vibration-conveyor belt over a length of 2 metres, without disturbing them. In this section the hot pellets will be cooled down to 30 % of the input temperature by 3 vans. The integrated sieve is separating the pellets from dust and too small pellets.According to size of pellets, the sieve can be provided with holes of 4-5-6 or 8 mm A suck-off device with 100 mm hose-union is installed front and rear to extract dust continuously. This suck-off device can be installed at an external suck-off plant or it can be installed at a supplementary suck-off plant with integrated filters. The energy efficiency of the complete plant is only at 500 watt. The Advantages:Energy saving van with security screen Exchangeable security screenSmooth transportation of pellets on conveyor-beltSuck-off device front and rear with 100 mm hose-union for dust-free working.Electric box with 16 Ampere socket Technical Details Length: 2000 mm Width: 500 mm Height: 610 mm Sieve width and length: 200x2000 mm Size of sieve holes: 5 mm standard Vibration motor: 380 Watt 400 Volt Van: 3 pieces, 40 Watt 240 Volt Weight: 80 Kg Input front: Height 500 mm Output rear: Height 360 mm Suck-off device below, front and rear 100 mm for dust-free working.