Весна конусная дробилка

Cone crusher structure and operation principles: Cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed. Type of the crushing cavity is decided by the application of the ores. Standard type is for PYZ (secondary crush); middle type is for PYD (tertiary crush); short-head type is for primary and secondary crush. Cone crusher technical paramete: ModelDiameter of Bottom End of Conical Crushing Head (mm)Max. Feed Size (mm)Adjustable Range of Discharge Opening (mm)Crushing Capacity (t/h)Motor Power (Kw)Rev. of Eccentric ShaftWeight (t)Overall Dimension (L×W×H) (mm)PYB6006007512-25403035652234×1370×1675PYZ600600353-135-23303565.32234×1370×1675PYB90090011515-5050-905533311.22692×1640×2350PYZ900900605-2020-655533311.22692×1640×2350PYD900900503-1315-505533311.32692×1640×2350PYB1200120014520-50110-16811030024.72790×1878×2844PYZ120012001008-2542-135110300252790×1878×2844PYD12001200503-1518-10511030025.32790×1878×2844PYB1750175021525-50280-48016024550.33910×2894×3809PYZ1750175018510-30115-32016024550.33910×2894×3809PYD17501750855-1375-23016024550.23910×2894×3809PYB2200220030030-60490-750260-280220804622×3302×4470PYZ2200220023010-30200-580260-280220804622×3302×4470PYD220022001005-15120-340260-28022081.44622×3302×4470