вертикальный штатив турникет

Tripod turnstile Gate 1. Features and Functions 1) The turnstile has fully rainproof stainless steel housing, processed by numeric control punching and laser drilling, novel and elegant. 2) The turnstile has unique mounting surfaces (for the installation of card reader and indicator light, etc.), ensuring simple and convenient installation of the turnstile control equipment of system integrators. 3) The interior module of the tripod turnstile has a cushioning device for automatic regulation of hydraulic pressure, which helps to realize low noise, no impact and automatic decelerated returning to home position during operation of the turnstile. The finish of the interior module has been treated by yellow dichromateplating. 4) Programmable turnstile control is available, for one-direction or bi-direction control (to be set by the user). 5) The base cover can be opened using a key, therefore it is convenient for the user to install it. There are card reader supports at both sides of the turnstile, and a 40CM*18CM mounting plate, for the mounting of controller, is fixed at one side of the housing. 6) The base is fixed with four 10MM expansion bolts. 2. Technical Parameters and Configuration: Housing: 280* 480* 980; Tripod Bar: Length 480 mm, Diameter 40 mm Power Supply: Single-Phase AC220V, 3A, 50/60Hz Control Voltage: DC24V, Power Consumption: 40W Electromagnetism: No Residual Magnetism, without Magnetization Buffer: Hydraulic Pressure Reset Cushioning, without Bumping Noise Operating Ambient Temperature Range: -20°C 60°C Operating Ambient Humidity Range: 0 95%RH Net Weight: 45kg Gross Weight: 50kg