В режиме ожидания убийца

he IR-Controlled standby killer is power-saving product that can cut off the power of electrical appliances being in standby mode, thus reduces the standby power consumption. The product itself consumes less than 0.25W. Therefore the standby power consumption is limited to the least, and power is saved to the utmost. The IR-Controlled standby killer can be used together with common electrical appliances controlled by non-digital-display IR remote control. There is no need to buy an extra remote control for the IR-Controlled standby killer, as the original remote control of the electrical appliances can be used. The power consumption of the appliance must be more than 30W in the switched on mode while in the standby mode must be less than 30W, then The IR-Controlled standby killer will cut off the power automatically one minute later. The IR-Controlled standby killer will automatically cut off the power in case the over-current is more than 12A consequently, the danger of overloading is avoided, and safety for the electrical appliances is assured. Technical data 1. Rated voltage: 230V AC/50Hz 2. Max. Load: 10A/2300W 3. Standby power consumption: <0.25W 4. Switch off threshold: Approx 30W 5. Switch-off delay: Approx 1 Min. 6. Distance of IR receiving: >10m 7. Angle of IR receiving: ± 35° 8. Pollution Degree: 2 9. Rated impulse withstand voltage: 2500V 10. Connection of switch: Single pole, single load 11. Installed fuse: AC 250V 10A 12. Protection degree: IP20