Установите приставка 800HD, Dream Box, DM800HD, ТВ-приемник

Dreambox 800HD satellite receiver,Set top box 800HD,digital satellite receiver TV receiver ,DM800 300 MHz MIPS Processor - Linux Operating System - OLED - Display - MPEG-2 / H. 264 Hardware decoding - Tuner: DVB-S, optional: DVB-C, DVB-T - Tuner Module, Plug&Play - 1 x Smartcard-Reader - V. 24/RS232 Interface - 10/100Mbit Ethernet Interface - 1 x Scart (RGB, FBAS or S-Video) - DVI - 2 x USB 2.0 - analog modem - S/PDIF Interface for digital bit stream out (AC-3) - 64 MByte Flash, 256 MByte RAM - SATA - for use either as internal SATA HDD 2, 5 - or to use for extern eSATA - unlimited channel lists for TV/Radio - channel-change time < 1 second - automatic service scan - directly bouquet-lists - EPG (electronic program guide) - multiple LNB-Switching control (supports DiSEqC) - OSD in many languages and skin-support - Videotext Decoder - extern 12V power supply DreamBox DM800 technical data DBS-Tuner mit DVB-S2: Frequency Range 950...2150 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK, QPSK) Symbol rate DVB-S: 2...45 Mbaud/s, SCPC/ MCPC DVB-S2: 10 - 31 Mbaud/s (8PSK), 10 30 Mbaud/s (QPSK) Video decoder: Video Compression MPEG-2 and MPEG-1 compatible, H. 246 Video Formats 4: 3 / 16: 9 Letterbox for 4: 3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz Output analog: Output Level L/R 0, 5 Vss on 600 Ohm THD > 60 dB (1 KHz) Crosstalk < -65 dB Output digital: Output Level 0, 5 Vss on 75 Ohm Sampled Data Filtering 32 KHz, 44.1 KHz, 48 KHz S/PDIF-Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, RGB, S-Video Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115, 2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet: 10/100 MBit compatible interface Function: Update of Firmware Analoge modem: Analoge modem for Internet connection SATA Interface: - for use either as internal HDD 2, 5 or eSATAor internal 2, 5" HDD USB 2 x USB 2.0 Host LNB power and polarisation per tuner: LNB Current 500mA max.; Short-circuit-protected LNB Voltage vertical < 14V no load, > 11, 5V at 400mA LNB Voltage horizontal < 20V no load, > 17, 3V at 400mA Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < 15W at 12V External PSU Input: 110-240V AC / 50-60Hz / 0, 6A Output: 12V = / 3, 0A Physical specification: Ambient Temperature +15C...+35C Humidity < 80% Size (W x D x H): 195 mm x 310 mm x 40 mm Weight:2 kg without HDD