Ультразвуковой Водоросли прополки устройство

BBKA-01 ultrasonic Algae weeding out device BBKA-01 ultrasonic Algae weeding out device guarantees 100% success in the purpose for which this device is produced, killing algae by ultrasonic vibrations. The distance which has to be reached by the ultrasonic is of decisive importance, not the volume of the water. The speed with which the algae are killed depends on the kind of algae which have to be treated, but one thing is certain: there is no other ultrasonic deviceat the moment which operates as fast as the The especially designed transducer is a waterproof element, which converts the electrical power into sound vibrations in frequencies which are fatal for various kinds of algae, but inaudibleand harmless for human beings and (most) animals. The transducer of theBBKA-01 ultrasonic Algae weeding out devicehangs in the water,about 12 cm below thesurface, mounted under a float of modern design, whichis notconspicuous and qua colour blends into the water. Because of the way the transducer (underwater speaker) hangs in the water, the sound waves will be reflected by the water surface and will fill the water volume entirely getting to all algae present. The vibrations rip the vacuole (the microscopic cell in which all life functions of the algae arehoused) thus killing the algae. BBKA-01 ultrasonic Algae weeding out devicehas the exclusive worldwide sales rights for this transducer. Lakes Ponds Swimming pools (Olympic size) Drinking water storages Cooling towers Water purifying systems Water storages for the horticulture industry Irrigation installations for the garden industry Recycling water containers Raceways for aquacultures Waste water recycling plants Technical data LG SONIC XXL Range: 150 m. all around (horizontal and vertical) Power consumption: 50 Watts Input 220 or120 V. Cable length: 20metresInstallation is quite simple: The electronic box has to be mounted in a dry, covered place. After putting the plug from the transducer cable into the corresponding socket of the electronic box, the float with the transducer can be put in a suitable place into the water; through the water mass and covers as much as possible of the water that has to be treated. The vibration beams leave the transducer in an arc of 180 degrees If everything is fixed according to the instructions, the relevant plug from the electronic box can be put into the mains (220 or 120) From this moment on the device is in operation and within a day or two you may already observe the first results.