Углеродные молекулярные сита

Features: 1) A carbon molecular sieve belongs to carbon sorbent. It is a carbon materialwith many hollow holes in its structure. Its hole-structure is irregular. CMSis one kind of non-metering compound and its main performance is based onthe micro-hole structure 2) The air separation capacity of CMS relies on the different speeds of diffusionof gas passing CMS micro-hole and/or different adsorbabilities 3) Under balanced condition, the adsorption amount of CMS to oxygen andnitrogen is very close, while the speed of oxygen molecule passing throughthe micro-hole structure is much faster than the speed of nitrogen molecule 4) This principle is the base of CMS nitrogen generation. At the moment farbefore the balanced condition occurs, using PSA process flow, nitrogen isseparated out form air Technical parameters: 1) When adsorption pressure is 0.6MPa, the nitrogen purity is 99.9,99.5 and99.0 percent, their nitrogen flow are respectively 120, 180, 220 N cubicmeters per hour and nitrogen air proportion is 30, 41 , 45 percent 2) When adsorption pressure is 0.7MPa, the nitrogen purity is 99.9,99.5 and99.0 percent, their nitrogen flow are respectively 125, 205, 245 N cubicmeters per hour and nitrogen air proportion is 30, 41 , 45 percent 3) When adsorption pressure is 0.8MPa, the nitrogen purity is 99.9,99.5 and99.0 percent, their nitrogen flow are respectively 130, 220, 275 N cubicmeters per hour and nitrogen air proportion is 31, 42 , 46 percent 4) Grain diameter: 1.5 mm 5) Adsorption period: 2 x 60s 6) Pile proportion: 630 650g/l 7) Compressive strength: not less than 100N/grain