углерода ремонт волоконно-клей

Carbon Fiber Repair Adhesive When the concrete surface is unsmooth, you will need it to repair and thus the carbon fiber sheet can paste plainly and straightly. The viscosity is moderate to scrape easily, and high strength. It has excellent mechanical property,good tenacity, wear resistant, anti-corrosion and water proof.Technnical Specification: Conform to the Standard Technical Data GB50367-2006.Item NameTechnical RequirementTest ResultColloid FunctionTensile strength of adhesive (Mpa)≥30≥48Banding strength of adhesive (Mpa)≥40, Shall not show brittle (fracture-like) damage56, Shall not show brittle (fracture-like) damageBonding strength of pulling with concrete (Mpa)≥2.5, Cohesive Failure inside of the Concrete5.6, Cohesive Failure inside of the ConcreteNote1.In the test of bonding strength of pulling concrete, the damage are all the concrete block.2.Concrete strength grade: C503.Proportion is A:B=2:1(w/w)Note:1.If occur the deposit during traspotation, please use the electric drill to stir before using.2.Mix A and B with the ratio of 2 to 1 and beat till smooth.3.The density is about 1.35 1.40g/cm3 (condensate ), gel time is about 3 8 hours. Use up within 20 60min(23°C) , depending on the environment temperature. The gel time is about 1.5 6 hours.Package and storage:1.This product is packed as A6.6kg +B3.4kg /group or other special size.2.Store in the enviornment temprature under 5°C- 40°C and the grarantee period is 9—12 months.3.Be away from open flame and heating devices.