тяга радиально-упорный подшипник

thrust angular contact ball bearing SKF bearing SKF.QJ324 N2MA Angular contact ball bearings Large storage,professional tecnology and efficient logistics. BrandModeld (mm)D (mm)B (mm)Product CategoriesSKFQJ215 N2PHAS7513025Angular contact ball bearingsSKFQJ217 NAMA8515028Angular contact ball bearingsSKFQJ319 NAMA9520045Angular contact ball bearingsSKFQJ322 NAMA11024050Angular contact ball bearingsSKFQJ328 NAMA14030062Angular contact ball bearingsSKFQJ332 NAMA16034068Angular contact ball bearingsSKFQJ338 NAMA19040078Angular contact ball bearingsSKFQJ344 NAMA22046088Angular contact ball bearingsSKFQJ1248 MA24044085Angular contact ball bearingsSKFQJ1056 NAMA28042065Angular contact ball bearings Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle α is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis angular contact ball bearings are produced in a wide variety of designs and sizes. Design features: angular contact ball bearings in the inner and outer rings on the raceway, and the internal and external circles for the relative displacement axial bearing. This means that the design of the bearing ring compound is used to bear load, the radial and axial load load at the same time role. LHB angular contact ball bearings in a wide range of design and size of production, commonly used types of single row, double row angular contact bearings and sealed double angular contact ball bearings and four point contact ball bearings. We can produce the diameter from 10mm 240mm LHB single row angular contact ball bearings. 10mm 110mm LHB double row angular contact ball bearings ,sealed double row angular contact ball bearings and four point contact ball bearings etc,Following is the internal structure of LHB different product descriptions. A 30° contact angle AC 25° contact angle B 40° contact angle CA Bearing for universal matching. Two bearings arranged back-to-back or face-to-face will have an axial internal clearance smaller than Normal (CB) before mounting CB (CB)Bearing for universal matching. Two bearings arranged back-to-back or face-to-face willl have a Normal axial internal clearance before mounting CC Bearing for universal matching. Two bearings arranged back-to-back or face-to-face will have an axial internal clearance greater than Normal (CB) before mounting DB Two bearings matched back-to-back DF Two bearings matched face-to-face DT Two bearings matched in tandem E Optimized internal design F Machined window-type steel cage, ball centred GA Bearing for universal matching. Two bearings arranged back-to-back or face-to-face will have a light preload before mounting GB Bearing for universal matching. Two bearings arranged back-to-back or face-to-face will have a moderate preload before mounting GC Bearing for universal matching. Two bearings arranged back-to-back or face-to-face will have a heavy preload before mounting J Pressed window-type steel cage, ball centred M Machined window-type brass cage, ball centred MB Machined brass cage, inner ring centred N1 One locating slot (notch) in the large outer ring side face N2 Two locating slots (notches), 180° apart, in the large outer ring side face P Injection moulded window-type cage of glass fibre reinforced polyamide 6,6, ball centred PH Injection moulded window-type cage of glass fibre reinforced polyetheretherketone (PEEK), ball centred P5 Dimensional and running accuracy to ISO tolerance class 5 P6 Dimensional and running accuracy to ISO tolerance class 6 W64 Solid Oil filling Y Pressed window-type brass cage, ball centred