Твердость по Роквеллу TH301 Тестер

The Details of our Rockwell Hardness Tester TH301 are as follows: Features: Horizontal protrudent nose design, testing on surfaces difficult to reach Testing internal surface of ring parts whose diameter is not less than 23mm(0.900) Testing external surface of round bars whose diameter is not less than 3mm (0.120) Automatic test process High definition backlight LCD Simple and easy selectable operation menu RS-232/USB data output Rockwell hardness tester with auto-switch of test force. Technical Specification: Model TH301 Hardness scalesRockwell A, B , C, D,E, F, G, H,K, L, M, P, R, S, VResolution0.1Rockwell unitPre-load98.07N/10kgfTotal load588.4N/60kgf, 980.7N/100kgf, 1471N/150kgfDisplayMatrix backlight LCDLanguageEnglishOperationMenu selectable, Membrane keypadTest processAutomaticLoad duration2-50 seconds, Can be set, dynamic displayed and storedFunctionsUpper / lower hardness limits setting and alarming Data statistics : Ave., Max., Min., standard Deviation, convert tested values to HB, HV, HLD, Rockwell Superficial and δb Curvature correction: cylinder and sphere surface Data outputRS232, USBstandardISO6508.2 , ASTM E-18Testing spaceVertical: 260mm/10.24Horizontal:150mm/5.91Work piece sizeExternal surface cylinder: Min.φ3mm (0.120) Internal surface cylinder: Min.φ23mm (0.900)Power supply220v/110v, 50Hz, 4ADimensions715mm×225mm×790mmWeight100kgStandard deliveryMain unit Test Block A Test Block B Test Block C 120° cone diamond indenter 1/16"ball indenter 1/16"spare ball Screw for indenter Round flat anvilφ70 Large Vee anvil Power supply cable Instruction manual Warranty card TIME certificate Optional accessaryPrinter TA230 Connecting cable Short diamond indenter Flat diamond indenter Slim diamond indenter 1/8 (φ3.175mm) indenter and spare ball 1/4 (φ6.350mm) indenter and spare ball 1/2(φ12.70mm) indenter and spare ballRound flat anvil φ225 Round flat anvil φ150 Small Vee anvil Flat /Vee anvil Assistant support Assistant joist