TSPS (R) Распределение Совет

TSP(R) Series Lighting Distribution Box fully conforms to IEC-493-1 criterion, Good-Looking, Endurable and safe, it is widely used as a power Distribution System for Factory, Mansion, Residential House, Emporium, etc.The Shell and Bracket of it is made from 1.00mm high quality galvanized Steel Sheet, spraying with Smooth Powder Paint, mixed with ABS plastic rim and transparent cover, which using for monitoring the Elec. components in the Box. There are holes in the upside and downside, you can install the electric line flexibly, the protective category reach to IP20. TSP(R) Series Lighting Distribution Box Can install MG,Siemens, or other MCBs. The Unique Connecting Methods between The Din Rail and the Box, so the Din Rail and CBs can rotate at the same time. The Construct Structure of the Box perfectly saved the Spaces inside the box and fully saved the costs as well. TSP(R) Series Lighting Distribution Box always use for the control, load, Leak and short-way protection of Power, Lighting or Motor, which is not over than 50-60Hz, 600V, Loading Currency not over than 100A, Single or Three Phase. Normally, The Bottom of the Distribution Board use a Connecting Bank for co-connecting, and all the Connecting Bank would be provided by us, what we need customer to provide is the Electrical System Diagram. For the sake of fully protection., there are Neutral and Earthing Rails Inside of the Box! The box can mount and arrange 7 Way, 10 Way, 12 Way, 16 Way, 20 Way Breakers, each single pole for 1 Way; Double Pole Leakage Breakers for Two Way, and 4 Pole Leakage Breakers for 4 Way.Using Condition: 1. General Temperature: Not over than +40°C, Not less than -20°C. 2. Altitude height not over than 2500M 3. Relative Humidity: Not over than 90%. 4. Without dust, fire, Corrosion or other dangerous items around