Цилиндр внутренний сушилка

1, Overview and uses After water pressure test of cylinders, a lot of moisture left inside wall, removing the most simple of these water One way is to blow hot air addition. This can reduce the corrosion of the surface of the cylinder to prevent the micro - The breeding of biological reproduction, and high purity gases for Medical Oxygen cylinder is particularly necessary. The device is equipped with electric heaters and fans. Equipment installation convenient, easy to use, the effect Reliable and suitable for cylinder factory and the use of gas cylinder test stations. 2, technical parameters 1. Applicable to cylinder size: diameter φ220 425mm Height 800 2000mm 2. Electric heater Total Power: 10KW 3. High Pressure Fans Power: 2.2KW 4. Fan the greatest pressure 36KPa 5. Fan maximum flow 250m / h 6. Blowing air temperature: 80 120 7. Working efficiency: 15 20min / times 8. Every time the number of purge and bottle: ≤ 4 Zhi 9. Host Dimension (L × W × H): 2000 × 800 × 1600 mm 3, structure description The equipment consists of bracket, electric heater, high pressure air, blowing the gun, connection hoses, electrical Instrument control box so on. High-pressure fan output heated air through the heater into the multi-pass Tube, and then assigned to the four branch pipe purging gun, blowing the gun in-depth within the blowing cylinders