Цилиндр поворота турникета

Technical parameters: Material: 304# stainless steel, 1.5mm / 1.2mm thick Cylinder diameter: 168mm Arm length: 500mm Maximum tolerance of arm: 30Kg Rotation angle of arm: 1800 Swing Direction: bidirectional Power: AC220 ±10%V, 50 ±10%HZ Drive Motor: DC brush motor, 24V Input Interface: Dry contact signal, or 12V level signals, or 12V pulse signal width pulse ≥ 100ms of, driving current ≥ 10mA Communication Interface: RS485 standard, communication distance ≤ 1200m Pass rate: 40 persons / min (normally open), 25-30 persons / min (normally closed) Gate opening and closing time: 1-2 seconds Work Environment: indoor or outdoor (shelter) temperature: -10 50 Relative humidity: ≤ 90%, non-condensing Functions and features:1. Self-test and fault alarm function, user-friendly maintenance and use;2. With a small press plate built-in master board, to program devices running state;3. Anti-pinch and anti-bumps mechanical structure; in the process of arm reset, if meet resistance, the motor automatically stop working within the specified time, and reset after the default delay (until reset), and the intensity is very small (≤ 2Kg );4. Anti-collision function, the arm automatically locked, in the absence of gate opening signal is received.5. Arm synchronization function (for the case of double swing turnstile and open facing).6. Automatic reset function. When gate opening, after a specified period of time that does not pass, the system will automatically cancel the user's current access permissions;7. Adjustable normally open or normally closed, in order to meet the requirements of the different venues.8. Induction or delay automatically reset, the standard is automatic reset after 5 seconds (adjustable).9. Arm automatically open when power-off, close when power-on, that meet fire safety requirements.Configuration:Cylinder 1 Arm 1 Control board 1 set Transformer 2 Motor 1 Movement and the transmission 1 set