Труба сварки индукции Инвертор Мощность нагрева

Pipe welding induction heating power supply AtecD M-series high-frequency induction heating power supply used in pipe welding: AtecD series of M-type induction heating power supply using MOSFET (FET) for inverter, output frequency up to 100KHz or more, power is 10KW-100KW, used for welding stainless steel tubes and other tubes. Through professional and accurate impedance matching, the device is suitable for heating the pipe. All air cooled structure, high system efficiency and power factor. System failure rate is low, and has no water system failure.A variety of control methods and a rich interface, easy to implement automatic control. Precise control of the DSP, the frequency of automatic tracking, ensure that devices work in the best resonant state; and if the grid voltage fluctuated, the output power will remain unchanged. Fully functional and reliable protection limit, short circuit in the sensor, workpiece short-circuit, overload operation, abnormal fluctuations of the grid, the equipment will not be damaged. Output transformer isolation, the sensor voltage is low, and can be single-grounded. Air-cooled transformer design life of 10 years, no brass jams. No polarity filter capacitor design life of 10 years (electrolytic capacitors less than 5 years). The parameter setting functions online.